Tianjin Yaxing Metal Die Casting Co., Ltd.

Tianjin Yaxing Metal Die Casting Co., Ltd.

A professional manufacturer integrating the design, development, manufacturing, and precision machining of large, medium, and small, precision, complex die-casting and die-casting products

Industry News

Company News

2023-03-07

- Die casting is a metal casting process

Die casting is a metal casting process characterized by the application of high pressure to molten metal using the cavity of a mold. Molds are usually machined from stronger alloys, a process somewhat similar to injection molding . Most die castings are ferrous, such as zinc, copper, aluminum, magnesium, lead, tin, and lead-tin alloys and their alloys. Depending on the type of die casting, a cold chamber die casting machine or a hot chamber die casting machine is used.

2023-03-07

- Relation between die casting manufacturing and die casting machine and die casting release agent

Die casting manufacturing, also known as pressure casting, is a casting method in which liquid or semi-solid metal or alloy, or liquid metal or alloy containing reinforcement phase, is filled into the mold cavity of die casting at a high speed under high pressure, and the metal or alloy is solidified under pressure to form castings.

2023-03-07

- Brief introduction to die casting manufacturing process and matters needing attention

Die casting can be understood as pressure casting, which is a casting method in which molten alloy liquid is injected into a pressure chamber to fill the cavity of the steel mold at a high speed, and the alloy liquid is solidified under pressure to form the casting. The main characteristics of die casting differ from other casting methods are high pressure and high speed.

2023-03-07

- Metal die casting manufacturing process

Metal die casting manufacturing, by die casting machine, molten alloy material, steel mold, release agent four elements. Simple summary: The alloy that melts the furnace (common: Aluminum alloy,

2023-03-07

- Determination and analysis of die casting process

The die-casting process is the process of unifying pressure, speed and time by using the three major elements of machine, mold and alloy. For metal thermal processing, the existence of pressure is the main feature of the die casting process that distinguishes it from other casting methods. Die casting is a fast-growing special casting method with less cutting and no cutting in modern metal processing technology. It is the process of filling the mold with molten metal at high pressure and high speed, and crystallizing and solidifying under high pressure to form a casting. High pressure and high speed are the main characteristics of die casting. The commonly used pressure is tens of megapascals, the filling speed (inner gate speed) is about 16-80 m/s, and the time for the molten metal to fill the mold cavity is extremely short, about 0.01-0.2 seconds.

2023-03-07

- Precautions for die casting forming conditions

Die casting machine, die casting alloy and die casting die casting are three essential factors in die casting production. The so-called die casting process is to use these three elements organically and comprehensively, so that qualified castings, or even high-quality castings, with good appearance, good internal quality and size in line with the requirements specified in the drawing or agreement can be produced stably, rhythmically and efficiently.

2023-03-07

- Do you know all eight metal forming processes?

The forming method of metal materials is an important part of part design, and it is also a matter of great concern to manufacturers. Today, I will take you to look at the eight major processes of metal forming processes: casting, plastic forming, machining, welding, powder metallurgy, and metal injection molding. , Metal semi-solid forming, 3D printing.

2023-03-07

- What metals are used in die casting?

The minimum cross-sectional area and minimum drawing Angle corresponding to various materials are listed in the table below. The thickest section should be less than 13mm.

2023-03-07

- Requirements for die runner on cold chamber horizontal die casting machine

① The size of the inner diameter of the pressure chamber should be selected according to the required specific pressure and the fullness of the pressure chamber. The inner diameter is different from the axis, which will cause the problem of punch stuck or serious wear, and the wall thickness of the sprue sleeve should not be too thin. The length of the sprue sleeve should generally be less than the delivery stroke of the injection punch so that the paint can escape from the pressure chamber.

2019-08-13

The main products are automobile pump shell series automobile generator

The main products are automobile pump shell series automobile generator, starter end cover series; Train brake accessories series; Valve handle series; Automobile tail cover aluminum alloy spike and intelligent greenhouse the main products are automobile water pump shell series automobile generator, starter end cover series; Train brake accessories series; Valve handle series; Automobile tail cover aluminum alloy spike and intelligent greenhouse

2019-08-13

The main products are automobile pump shell series automobile generator

The main products are automobile pump shell series automobile generator, starter end cover series; Train brake accessories series; Valve handle series; Automobile tail cover aluminum alloy spike and intelligent greenhouse the main products are automobile water pump shell series automobile generator, starter end cover series; Train brake accessories series; Valve handle series; Automobile tail cover aluminum alloy spike and intelligent greenhouse

2019-08-13

The main products are automobile pump shell series automobile generator

The main products are automobile pump shell series automobile generator, starter end cover series; Train brake accessories series; Valve handle series; Automobile tail cover aluminum alloy spike and intelligent greenhouse the main products are automobile water pump shell series automobile generator, starter end cover series; Train brake accessories series; Valve handle series; Automobile tail cover aluminum alloy spike and intelligent greenhouse

< 1 >